Swift Plumbing Logo

Saniflo & macerator specialists · family-run since 2002

Saniflo & Macerator Repairs, Unblocking and Replacement in Newcastle & the North East

Blocked, humming or leaking macerator toilet? Our local plumbers clean, unblock and replace Saniflo-style units across Tyne & Wear, County Durham and Northumberland.

  • Blocked macerators cleared and the discharge pipe checked
  • Fault-finding for humming, constant running, leaks and smells
  • Like-for-like replacement and new units for added WCs, basins and showers

Macerator call-outs are a priority — call to check today's availability.

We clean and unblock where practical. If the motor has failed, we'll explain the replacement options and price before starting.

Engineer with a new macerator unit ready to fit
New unit, ready to fit
  • Family-run since 2002
  • Price explained before we start
  • Local engineers covering the North East
  • Written report after every visit

What our customers say

“Great communication throughout. A reasonable price and arrived earlier than expected. The plumber called me 30 minutes before he turned up and was with me as promised. Very polite and got the job done with no messing around. Explained everything as he went and cleaned up when complete. You can’t ask for more than that. Thank you.”
— Rich R · Google review

Common Saniflo and macerator faults

Blocked macerator

Symptoms: Weak or slow flush, water rising in the pan, waste backing up into a connected shower or basin, or the unit running longer than usual.

Likely cause: Wipes, sanitary items, cotton buds or hair caught around the blades or in the chamber, or scale narrowing the outlet.

What we do: We isolate the unit, clear the chamber and blades, check the discharge pipe and test it under normal use before we leave.

Humming but not pumping

Symptoms: The motor hums or buzzes when you flush but the water does not drain away.

Likely cause: Something jamming the blades, a blocked discharge pipe or non-return valve, or a pump that has failed.

What we do: We clear any jam or blockage and test the unit. If the pump or motor itself has failed, we recommend a replacement unit.

Running continuously or cycling on and off

Symptoms: The unit starts by itself, keeps running after a flush, or switches on and off repeatedly.

Likely cause: A stuck or scaled-up float or pressure switch, a non-return valve letting water run back into the unit, or a dripping cistern or tap feeding it.

What we do: We clean and descale the switch area, check the non-return valve and connected fittings, and deal with the source of the water.

Leaks and smells

Symptoms: Water under or around the unit, or a sewage smell in the bathroom.

Likely cause: A perished lid seal, loose inlet or outlet connections, a leaking joint on the discharge pipe, or a vent or filter problem.

What we do: We trace where the water or smell is coming from, remake or reseal the connections, and tell you if the unit itself is the problem.

Unit stopped working? Switch it off at the wall and stop flushing until we've had a look.

Before and after a macerator clean

Scale and waste build up inside the unit until the pump can't cope. We strip it down, clean and descale it, then test it before we leave.

Before Inside a macerator before cleaning, coated in scale and waste
After The same macerator after cleaning and descaling

Quick answer: A Saniflo or macerator is a pump unit behind or beside a toilet (sometimes also serving a basin or shower) that breaks up waste and pumps it through narrow pipework to the soil stack when normal gravity drainage is not possible — common in loft, basement and downstairs extension bathrooms. We clean, descale and unblock macerators, find out why a unit is humming, running on or leaking, and replace it when the pump or motor has failed.

Macerator unit with the lid off, ready to be cleaned

Cleaning, descaling and unblocking

Most call-outs are blockages and scale. We remove foreign objects from the chamber and blades, descale the unit and clear the discharge pipework so the pump can do its job again.

To help prevent it happening again:

  • Only flush toilet paper — no wipes (even "flushable" ones), sanitary items, cotton buds or dental floss.
  • Keep hair and food waste out of connected basins and showers.
  • In hard-water areas, descale regularly with a product made for macerators.
  • If the unit starts sounding different or running longer, get it looked at before it blocks completely.
Swift Plumbing van on site

How we diagnose a macerator fault

On arrival we check what is connected to the unit, isolate it safely, watch how it behaves when flushed, look inside the chamber and check the discharge pipe and non-return valve.

We clean, unblock and replace macerators. We don’t routinely rebuild motors or electrics — if the pump or motor has failed we recommend a replacement unit.

Repair or replace?

It depends on the age of the unit, how often it has failed, whether the fault is a blockage or a failed pump, whether parts are still available, and how noisy or smelly it has become. We explain what we recommend, and why, before we start any work.

Replacement and installation

We replace worn-out units like for like and fit new macerators when you are adding a WC, basin or shower, choosing a unit with the right capacity for what will be connected and planning a sensible discharge route.

A macerator needs a suitable electrical supply. We’ll tell you if an electrician is needed.

How it works

  1. Call or book

    Tell us what the unit is doing and, if you can, the make and model from the label.

  2. We find the cause

    We isolate the unit, look inside and check the discharge pipe, then explain what we recommend before starting.

  3. Fixed and tested

    Cleared, descaled or replaced, run under normal use before we leave — and you get a written report of what we did.

Frequently asked questions

Can you unblock a Saniflo?

Yes. Most blocked macerators are caused by wipes, sanitary items, cotton buds or scale. We isolate the unit, clear the chamber and blades, check the discharge pipe and test it before we leave.

Why is my macerator humming but not pumping?

Usually something is jamming the blades, the discharge pipe or non-return valve is blocked, or the pump has failed. Switch it off and avoid flushing until it is checked. If the pump or motor has failed we recommend a replacement unit.

Why does my macerator keep running?

Common causes are a stuck or scaled-up float or pressure switch, a non-return valve letting water run back into the unit, or a dripping cistern or tap feeding it. We check each of these and explain what we find.

Should I repair or replace my macerator?

It depends on the age of the unit, how often it has failed and whether the fault is a blockage or a failed pump. We tell you what we recommend and why, and we explain costs before starting any work.

Do you fit new Saniflo units?

Yes. We replace old units like for like and fit new macerators for added WCs, basins and showers. A macerator needs a suitable electrical supply — we’ll tell you if an electrician is needed.

Which brands do you work on?

Saniflo and most other macerator brands. If you can, tell us the make and model when you call — it is usually on a label on the unit.

What shouldn’t I flush down a macerator toilet?

Only toilet paper and human waste. Wipes (even "flushable" ones), sanitary products, cotton buds, dental floss, hair and food waste are the usual causes of blockages.

Macerator playing up in the North East?

Call now or book online — we'll talk you through it and give you a time.

Call 0191 622 0042